CAROL drum winches manual and powered

Compact High performance Robust many lifting and pulling applications:
  • Materials hoist
  • Moving temporary covers or roofs on swimming pools and other structures.
  • Trolleys travelling on inclines.
  • Scenery in theatres, opera houses and other entertainment centres.
  • Hangar doors and furnace doors.
  • To and fro movement of loads on double ropes.

Manual drum winches TR and TS Series

  • TR Series: Geared winch anchored in a number of positions either by a base or by the side, depending on the model.
  • TS Series: Worm gear winch anchored using 4 or 6 anchor points at the rear of the unit, depending on the model.

Common features:

  • Mechanism: The gears fully subjected to endurance and destruction tests. Hubs machined to retain lubrication.
  • Automatic ratchet brake with stainless steel spring.
  • Weather resistant: Highly robust chassis and treated mechanical parts.
  • Drum released by an easily accessible lever.
  • Safety device to prevent release when under load.
  • Mechanism protected by a removable casing.
  • Wire rope anchor point adaptable to various rope diameters.
  • Adjustable handle length.
  • Permanently attached handle adjustment knob.
 
TS Series Manual worm gear winches capacities: 250kg to 3000kg (550 lbs to 6600 lbs).
Specification (conversions from metric to U.S. measurements are approximate):
Capacity
kg (lbs)
Speed m/min (ft/min) Rope dia. mm (ins) Max length m (ft) Number of layers Effort on handle kg (lbs) Lift per complete turn of handle mm (ins) Weight kg (lbs)
250 (550) 1 (3.28) 5 (0.2) 20 (65.6) 4 11 (24.2) 21 (0.83) 10 (22)
500 (1100) 1 (3.28) 6.8 (0.27) 25 (82) 4 12 (26.4) 15 (0.59) 15 (33)
1000 (2200) 1 & 2 (3.28 & 6.56) 9 (0.35) 35 (114.8) 4 14 (30.9) 12 (0.47) 35 (77)
1500 (3300) 2 (6.56) 11.5 (0.45) 20 (65.6) 3 12 (26.4) 7 (0.28) 39 (86)
2000 (4400) 2 (6.56) 13 (0.51) 30 (98.4) 3 15 (33.1) 8 (0.31) 61 (134)
3000 (6600) 2 (6.56) 15 (0.59) 40 (131.2) 3 12 (26.4) 4 (0.16) 145 (320)
TR Series
Manual geared winches Capacities : 150 kg to 2,000kg (330 lbs to 4400 lbs).

 

Specification (conversions from metric to U.S. measurements are approximate):

Capacity
kg (lbs)
Speed m/min (ft/min) Rope dia. mm (ins) Max length m (ft) Number of layers Effort on handle
kg (lbs)
Lift per complete turn of handle
mm (ins)
Weight
kg (lbs)
150 (330) 1 (3.28) 4 (0.16) 22 (72.2) 6 15 (33) 185 (7.28) 8 (18)
300 (660) 1 (3.28) 5 (0.2) 40 (131.2) 6 10 (22) 35 (1.38) 16 (35)
500 (1100) 1 (3.28) 6.8 (0.27) 20 (65.6) 4 13 (29) 35 (1.38) 16 (35)
1000 (2200) 1 (3.28) 9 (0.35) 35 (114.8) 4 12 (26) 24 (0.94) 38 (84)
2000 (4400) 1 (3.28) 13 (0.51) 30 (98.4) 3 13 (29) 13 (0.52) 70 (154)

Powered drum winches: TE and TC series, with 200 kg and 300 kg capacities (440 lbs and 660 lbs)

  • TE Series: Standard unit, on 3 support sides, there are 4 anchor points forming a rectangle: 255 x 197 mm.
  • TC Series: Mounted within a frame for site operation, with a variety of possible methods of anchoring.

Common features:

  • Single phase motor 220 V, 50 Hz, lifting model, P = 0.75 IW - Speed : 1500 rpm. Starting by capacitor at current close to rated current. Class F - Protection to IP55 - Starting current : 10 amp.
  • Welded steel drum.
  • Electrical switch gear with weatherproof casing.
  • 3 phase motor 220/380 V, 50 Hz, lifting model, P = 0.75 kW - Speed : 1500 rpm Class F - Protection to IP55.
  • Sealed oil- bath helical reduction gearing Reduction ratios: 18: 1. 28:1, 31:1
  • Electromagnetic brake with 24 V D.C. P = 25 watts
  • Remote control with emergency stop, operating on low voltage (24V).
  • Upper and lower limit switches.
  • Standard power supply connector.
  • Other optional equipment on request.
 
TC Series: standard powered winches
Capacities: 200 kg and 300 kg (440 lbs and 660 lbs)

 

 

 
TC Series: mounted within a frame for site operation
Capacities: 200 kg and 300 kg (440 lbs and 660 lbs)
Specification (conversions from metric to U.S. measurements are approximate):
Motor kW Capacity
kg (lbs)
Speed
m/min (ft/min)
Rope capacity
m (ft)
Rope
mm (ins)
Weight
kg (lbs)
TE TC
1-0, 75 single 200 (440) 25 (82) 60 (197) 5 (0.2) 39 (86) 50 (110)
1-0, 75 single 300 (660) 20 (66) 60 (197) 5 (0.2) 39 (86) 50 (110)
1-0, 75 3 ph 200 (440) 25 (82) 60 (197) 5 (0.2) 39 (86) 50 (110)
1-0, 75 3 ph 300 (660) 20 (66) 60 (197) 5 (0.2) 39 (86) 50 (110)

Tillbaka